Two special router bit sets in an extraordinary packaging: The lid of the FAMAG metal box is embossed with an eye-catching design and inside the box each router bit finds its safe place in a foam insert on which the dimension of the router bit can be clearly seen. How lovely that this box also contains the matching pin wrench for the stop rings.
More important than the packaging is the quality of the tool. Here everything is absolutely right: The router bits are characterised by the high quality carbide plates, which are soldered very gently on the steel body. Low soldering temperatures reduce the hardening distortion considerably and affect the carbide much less than conventional methods. The shanks are machine wet cylindrical ground to the exact diameter of 8.0 mm and thus have a perfect concentricity. Only high-quality stop rings are used. The labelling indicates how much the cutters has to be inserted in the collet chuck of your router.
TCT router bit set Classic line 6+6 pcs. (Article 3381.866)
In addition to the six most common straight bits, you will find six rounding over bits with a total length of 90 mm in this set. With these six router bits in Ø 8/10/12/16/18/20 mm you are able to cut step by step particularly deep grooves. A good alternative to slot cutters made of tool steel, which too often fail in hard wood!
TCT router bit set Classic line 12-pcs. (Article 3381.812)
This 12 piece set offers a solid basic equipment of straight bits and panelling bits that no workshop should be without.
Look here for further details on the assembly!
