FAMAG | Home

Now new: Bormax 2.0
New centre point:
• Pinpoint positioning
• Cutting effect thanks to twisting geometry
• Less feed force
New circumference cutters:
• Cooling fins
• Less fraction
• Less heat
New chip breaking grooves:
• Easier boring
• Faster drilling
• Less feed force
Bormax prima:
Incl. changeable pre drill
Bormax prima long:
Now new incl. changeable pre drill
Now new with Bormax 2.0 geometry
To bore in Azobé
and other hardwood …
… FAMAG auger bits
for hardwood
USA: Best overall. Fine Wood Working Magazin
FAMAG Forstner Bit
Made in Germany
Where else?
The Bormax®
With fixed or replaceable center spur
Precision in perfection
FAMAG twist drills HSS-G
150 years experience

Sunday, April 15, 2018

Große Durchmesser senken? Sauber, schnell und einfach mit dem Bormax® 2.0

Threaded washers or screws with washers and nuts are used to connect construction woods. There are standards which describe washers regarding the used threads. If there is a standard given or in case you don’t want to see a connection, the washer and nut need to be counter sinked into the wood.

Friday, March 16, 2018

Left, right, long, short, sharp, fast, fully grounded and precise! Our HSS-G Machine wood drills!

When drilling in European or even exotic hardwoods, very high demands are placed on the tool. But as soon as you have to drill frontal –maybe even- in heartwood, the most wood drills strike after few centimetres. Because heartwood stands out by a high content of phenols. These impregnate the cell walls, the cells contain less water, are much dense and solid than the surrounding wood. But never mind, our HSS-G Machine wood drills make the cut.