Bormax® 2.0 WS prima at a glance
|
Name:
|
Bormax® 2.0 WS prima (former pilot guided Bormax®)
|
|
Series:
|
1624
|
Scope of supply:
|
Bormax® 2.0 WS prima, spare trocar spike, Ø 4 mm, HSS primary reamer Ø 4 mm and equivalent hex-wrench, sb-blister packed
|
Dimensions:
|
Available from Ø 15 mm to Ø 50 mm! GL 90 mm, shank Ø 10 mm with hexagonal shank
NEW now available in Ø 16,2 mm!
In need of bigger diameters? Please take a look at our Bormax® 2.0 WS prima long series 1614! Available up to a Ø 120 mm!
|
|
Bormax® 2.0?
|
Two offset grooved main cutting edges "break" the chips and
- ensure smooth chip removal
serrated circumferential cutting edge with longitudinal grooves
- require significantly less pre-pushing forces
- minimize friction and the resulting heat development
hexagonal shank
- for better power transmission
|
Prima?
|
The addition "prima" for our Bormax® 2.0 products stands for highest flexibility through interchangeable centering spike or pre-drills!
- centering spike
- Trocar tip Ø 4 mm, allows use like a normal Bormax® 2.0
- Primary reamer
- diameter 4,0 mm with a pointed angle of 60° allow drilling at different angles
- optimal guidance also in head wood processing
This makes Bormax® 2.0 a first-class choice for both staircase construction and woodturning.
|
|
Ideal in combination with...
|
If it has to get deeper!
Our extensions series 1639
Available in the total lengths:
- 80 mm (A-Ø 16 mm, S-Ø 10 mm)
- 125 mm (A-Ø 16 mm, S-Ø 10 mm)
- 250 mm (A-Ø 16 mm, S-Ø 10 mm)
- 400 mm (A-Ø 16 mm, S-Ø 13 mm)
|
|