|
|
|
|
|
|
|
|
Roller blind fitting hole-saw
UL of 100mm
To install roller blinds on windows, you have to drill holes for the cords to pass through. This often presents problems because you meet different materials.
To install roller blinds on windows, you have to drill holes for the cords to pass through. This often presents problems because you meet different materials (plastic, wood, metal etc…). For this reason we have added a dedicated new hole saw to our FAMAG-range so that you can effortlessly complete the task. This bimetal hole-saw has a useable length of 100 mm and is fitted with a HSS-centre drill which enables accurate alignment. This hole-saw is available in 3 diameters, Ø 17 mm (mini-cord), Ø 22 mm (mini-cord with guide bush) and Ø 25 mm (maxi-cord). Every hole-saw includes a hexagonal shank as well as an HSS centre drill which can be replaced if necessary.
Tip: Remove the centre drill from the hole-saw to extend working life as soon as you have made the first cut.
Each 2174 hole-saw comes complete with centre drill and hexagonal shank. Hole-saw material: HSS-bi-cobalt with vari-pitch toothing 4-6 tpi.
 |
Item-N°. |
Outside
Ø
[mm] |
Shank
Ø
[mm] |
Total length
[mm] |
Useable
length
[mm] |
Price
[EUR]
|
| 2174.017 |
17 |
12/6kt |
220 |
100 |
49,95 |
| 2174.022 |
17 |
12/6kt |
220 |
100 |
49,95 |
| 2174.025 |
17 |
12/6kt |
220 |
100 |
49,95 |
| 2174.301 |
Shank with centre drill |
18,25 |
| 2174.307 |
Centre drill Ø 7 mm |
5,00 |
All Prices are net prices
|
|
|
|
|
|
|
|
|
|
|